facebook Created with Sketch. file Created with Sketch. Icon Button/Grid linkedin Created with Sketch. black Created with Sketch. ic_mail_24px Created with Sketch. Group 6 Created with Sketch. twitter-blue Created with Sketch.

Conventional Zone Monitor Modules

The M210E-CZ and CZR conventional zone monitor modules allow a zone of conventional or IS conventional detectors to be connected to a System Sensor analogue addressable system.

The M210E-CZ and CZR conventional/conventional IS zone monitor module can be powered from the analogue communication line or from an external power supply. Where the conventional zone is powered from an external power supply, the communication line is fully isolated from the conventional zone and from the power supply. A fault signal will be transmitted to the panel in case of an open circuit or short circuit on the conventional zone wiring or when the external fault input is pulled low.


  • Connection of a zone of simply conventional / IS conventional detectors to intelligent systems
  • Monitors open circuit and short circuit faults
  • Tri-colour status LED
  • Zone powered from comms line or 24V PSU
  • Remote reset of conventional zone
  • Compatible with:
    • IS conventional detectors (M200E-CZR)
    • 100, 400 and EC series detectors (M200E-CZ)
    • S300/ECO1000 detectors
    • 6500R and 6500RS optical beam detectors
  • Monitoring of external power supply
  • External fault input
  • Fits M200E-SMB mounting box / M200E-DIN module rack + M200E – PMB panel mount bracket Connection
  • -20°C to 60°C Operating temperature range
  • 5% to 95% Operating humidity range